DFI nF4 Ultra-D probleema

[FOX]

Nesen iegaadaaju sev shaadu deeli. Visu piesleedzot atklajaas probleema ar svaiga Win Xp instalaaciju. Instaleejot Win paraadaas kluudas, ka nevar nokopeet attieciigo failu. Tika izmeegjinaati 3 cd-rom, 2 winxp cd, 2 hdd un kluudas paraadaas identiski tajaas pashaas vietaas. Piesleedzot veco m/b abit AV8 kluudu nav un instalaacija noris veiksmiigi.

Izmeegjinaaju visaadus variantus, bet bez iipashiem rezultaatiem.
DFI m/b reviizija ir AE0

Varbuut kaads var paliidzeet?

[kiwi]

Palaid memtest, uzliec cpc = disabled

[Kasparz]

AE0??
Kāds mosfeta novietojums, tam, kas pie 4V jumpera.

[FOX]

Biju laidis memtest un nekaadas kluudas netika atrastas.

[FOX]

Kasparz:

Tu domaaji http://bildez.lv/bildes/knoppix/eoz/orig/1143744140.jpg
http://bildez.lv/bildes/knoppix/eoz/orig/1143744497.jpg

[kiwi]

Kāds RAM? Kādi hdd? Tie kas parakstā? LiveCD iet? Linux instalācija iet? Kas ar to cpc paliek?

[FOX]

Rami ir Kingston KVR400X64C3A 2x512
HDD 1 ir Seagate 200Gb
2 ir Maxtor 60Gb

Linux nememeegjinaaju.

Biezhi paraadaas arii BSOD ar ntfs.sys, irq, page_fault_in_nonpaged_area eroriem.

[kiwi]

Un PSU kāds?

Tā arī neatbildēji par cpc

[FOX]

PSU ir FSP 400-60THN-P

cpc tuuliit pameegjinaashu

update:

cpc pameegjinaaju, bet bez panakumiem. izlec bsod un viss bad_pool_caller

tik tieshaam platei buus jaaveic RMA

[brx]

mana dfi nf3 arii no sakum "neljava" instaleet windu, tiesa gan katru reizi savs fails chakareejaas.
tad biosaa ieraudziju ka rams automatiski uzlikts uz
2.5-3-3-6 bet defaultaa ramam jabut 3-4-4-8. uzliku manuali tos taimingus biki sudigakus un tad viss aizgaja. (pagaidaam laizju uz 2.5-3-4-7 ar pierguletiem subtaimingiem)

[FOX]

jap, taa arii bjiu meegjinaajis, palaidu taimingus ar roku, pat downclockoju proci, bet tas arii neko neliidzeeja.
taa izskataas, ka plate tieshaam ir braakjis.

[ORiONz]

mos saliec paareejos ram taimingus arii valiigus.

[kiwi]

DFI NF4 ļoti bieži ir jāliek viss ar roku :)

Un vēl joprojām iesaku pamēģināt livecd, kā nekā pat nicks tev tāds pats

[Kasparz]

Un pasaki, kur to dēli dabūji!

[FOX]

ok, tuuliit pameegjinaashu.

Kasparz:
pirku to EET.

Kasparz:

Skatos, ka XS esi iemetis postu par maniu deeli. taatad tas sanaak AD0 ar jaunaaku biosu, vai kaa?

[deff_ins]

kasparz a tas AE0 ir kruts? :o
JJ tādu nopirka - pēc pcb - jaunais.

ar tā pati problēma bija. atrisinājās ar 1 ram moduli - tātad stabilitātes problēmas.

[FOX]

Nu taa, beidzot deeli palaidu un uzliku winxp.
Saliku visus setingus ar rokaam un izmantoju tikai 1 512mb atminju. pagaidaam viss straadaa, jaaskataas, kaa buus taalaak.

[-JJ-]

nu uzinstalee ar vienu un peec tam laid divus :)!!

[FOX]

Taatad pieliekot otru ramu klaat saak mest kluudas. Sanaak, ka DFI nepatiik Kingston value craps, jaasaak mekleet normaalaakas atminjas.

[Kasparz]

kasparz a tas AE0 ir kruts? :o
You kidding?
Veči saka, ka jams labāks par eXpertu esot stabilitātes ziņā.

[mrlobber]

Kādi veči?

Informācijai tiem, kas to nav lasījuši...

Guys it seems some of you are a little confused by the various DFI motherboards and what they were designed to do. I will briefly try and explain here what Oskar has done so that you will all see not all boards are made to do the same things.

NF4, ultra D, SLI D. etc.

Boards tuned purely with TCCD, so much so the first sample boards had issues with Hynix and Micron not booting, they were slightly reworked but did remain TCCD monsters. If you want a good board to clock TCCX dimms this is the board to use.

NF4 eXpert

Market was moving away from TCCD, Oskar designs a board to run 2 gig kits well and 4 dimms at 1T, boards also clock 4 dimms 2t real well and are monsters with UTT, BH5 etc etc. if you like 3d benching then the eXpert will break your records.

RDX200

Same design as eXpert although ATI RD480 chipset. Board is also good with 4dimms 1T etc but is lacking bios support, this due to RD580 board development. If you are looking for reasonable Xfire then the RDX200 may suit you.

Venus

DFI decide to treat the overclockers to something a little special, High quality caps, reworked VRM's and reworked memory traces and drive give us the best of all worlds on the NF4, DDR600+ support with TCCD and 4dimm 1t capabilities. Price was high and all boards sold real fast, in all for me this was the best NF4 board ever made, Rgone from DFI believes this also.

CFX3200

Im guessing here as my board is still on its way to me. Built off the Venus platform with even further tweaks, DDR clock skew, LDT drive tweaks etc. Should be the finest 939 we have seen from Oskar, it brings together all he has learn't over the past 2 yrs into a final 939 board. It should be good with TCCD, BH5, Micron as well as 2gig and 4gig setups 1 and 2T.

Remember though the old NF4 was tuned for TCCD so you will not probably see higher clocks as the dimms will only go as fast as the dimms will go, the DFI boards have been maxing memory now for a long time...so remain level headed about what the board will do.


I hope this helps you all understand where DFI have been going over the past 2 yrs.

http://www.xtremesystems.org/forums/showthread.php?t=94391

[someonesick]

aha, tas mosfets kas blakus 4v parsleedzeejam ir savaadaaka novietojumaa, man ir AB0 un vinjam kjepinjas uz augshu, bet Knopixx`am uz saanu... kautkas tur izlabots ir...

[Kasparz]

Tā ir kruta plate!
Davai, es savu AB0+5Ls pret AE0 :D

[-JJ-]

kas tad tam manam AE0 ir krutaaks? :cool:

izdevaas kompi pie 280fsb 1:1 ar ramu stable dabuut ar tiem pashiem taimingiem, bet nu atgriezos pie optimaala 270..taa tachu vajag ne? optimaalo rezervi atstaat?!!bet nu gribu barokli pamainiit, jo domaju, ka tas HEC iisti jau tomeer nav piemerots!!

njemshu taadu, jo neko labaaku shobriid pacelt nevaru :D :

FSP FSP550-60PLN, 550W, 20+Adapt., PFC, ATX 2.0

Voltage:

+3.3V @ 27A

+5V @ 29A

+12V CPU @ 18A

+12V I/O @ 18A

-12V @ 0.8A

+5VSB @ 2.0A

[josi]

-JJ-: ņem droši, tikai tas būs karstošs un paskaļš.

[Kasparz]

JJ, ja ņemsi FSP, tad nāksies vien mainīt kūleri, jo kā jau josi un pollers teica, jams skaļš, un vajadzēs vien likt iekšā kādu klusāku.
Jā, tavs AE0 ir ūberkūls gribu, gribu. gribu :D

[FOX]

someonesick'am veiksmiiga roka. jutu, ka buus labai reviizijai. :D
biju domaajis, ka buus AD0 :D bet izraadiijaas veel labaaka.

[someonesick]

hehe
bet es tev teicu ka Tev buus probleemas ar to plati :D
nu nav tik vienkaarshas taas Lanparty seerijas ;)

[FOX]

Nu jaa, zinaamas gruutiibas biju paredzeejis, bet ne taadas.
anyway plate straadaa godam, tagad tikai jaapiemeklee labas TCCD atminjas.

P.S. kaa var atsleegt to Memory Testing a to sanaak ilgi gaidiit, liidz kaameer liidz 1Gb aizskaita.

[brx]

Nu jaa, zinaamas gruutiibas biju paredzeejis, bet ne taadas.
anyway plate straadaa godam, tagad tikai jaapiemeklee labas TCCD atminjas.

P.S. kaa var atsleegt to Memory Testing a to sanaak ilgi gaidiit, liidz kaameer liidz 1Gb aizskaita.
tu domaa memtest?
tad pameklee biosaa, vajadzetu but tur kur ir oc sadalja ;)

[someonesick]

jaa droshi var atsleegt memcheck, nez kam ir pacietiiba gaidit 1gb vai visus 2gb... ;)

[FOX]

Hmm izlidu visu biosu, bet taa arii neatradu kur sho var atsleegt.
Atkal liikas rokas :D

[Arvix]

Nav kaut kāds Quick Boot?
Manam DFI mobo bija... Protams jau drusku plates atškirās :D